Home Services Other Services Ad ID: 1183092 Posted 91 month ago  in Maharashtra Classifieds 1102 people saw this post
Ultrafiltration Plant-company India | Ultra Filtration System for Water Treatment|Unicare Technolog

Services
Other Services
Maharashtra
Wagholi, Pune, Maharashtra, India
Offer


Unicare UF System:

With intention the best quality of Mineral Water, Unicare Technologies offer wide range of UF systems as per customer requirement , we design Ultrafiltration plants for various applications like RO pre treatment, drinking water, ETP, STP and customised requirement

Ultrafiltration Means:

With intention the best quality of Mineral Water, Ultrafiltration is a separation process using membranes with pore sizes in the range of 0.1 to 0.001 micron. Typically, ultrafiltration will remove high molecular-weight substances, colloidal materials, and organic and inorganic polymeric molecules. Low molecular-weight organics and ions such as sodium, calcium, magnesium chloride, and sulfate are not removed. Because only high-molecular weight species are removed, the osmotic pressure differential across the membrane surface is negligible. Low applied pressures are therefore sufficient to achieve high flux rates from an ultrafiltration membrane. Flux of a membrane is defined as the amount of permeate produced per unit area of membrane surface per unit time. Generally flux is expressed as gallons per square foot per day (GFD) or as cubic meters per square meters per day.
Ultrafiltration membranes can have extremely high fluxes but in most practical applications the flux varies between 50 and 200 GFD at an operating pressure of about 50 psig in contrast, reverse osmosis membranes only produce between 10 to 30 GFD at 200 to 400 psig.

Ultrafilter vs. Conventional Filter:

With intention the best quality of Mineral Water, Ultrafiltration, like reverse osmosis, is a cross-flow separation process. Here liquid stream to be treated (feed) flows tangentially along the membrane surface, thereby producing two streams. The stream of liquid that comes through the membrane is called permeate. The type and amount of species left in the permeate will depend on the characteristics of the membrane, the operating conditions, and the quality of feed. The other liquid stream is called concentrate and gets progressively concentrated in those species removed by the membrane. In cross-flow separation, therefore, the membrane itself does not act as a collector of ions, molecules, or colloids but merely as a barrier to these species.
Conventional filters such as media filters or cartridge filters, on the other hand, only remove suspended solids by trapping these in the pores of the filter-media. These filters therefore act as depositories of suspended solids and have to be cleaned or replaced frequently. Conventional filters are used upstream from the membrane system to remove relatively large suspended solids and to let the membrane do the job of removing fine particles and dissolved solids. In ultrafiltration, for many applications, no prefilters are used and ultrafiltration modules concentrate all of the suspended and emulsified materials.

Factors Affecting the Performance of Ultrafiltration:

With intention the best quality of Mineral Water, There are several factors that can affect the performance of an ultrafiltration system. A brief discussion of these is given here.
Flow Across the Membrane Surface: The permeate rate increases with the flow velocity of the liquid across the membrane surface. Flow velocity if especially critical for liquids containing emulsions or suspensions. Higher flow also means higher energy consumption and larger pumps. Increasing the flow velocity also reduces the fouling of the membrane surface. Generally, an optimum flow velocity is arrived at by a compromise between the pump horsepower and increase in permeate rate.
Operating Pressure: Permeate rate is directly proportional to the applied pressure across the membrane surface. However, due to increased fouling and compaction, the operating pressures rarely exceed 100 psig and are generally around 50 psig. In some of the capillary-type ultrafiltration membrane modules the operating pressures are even lower due to the physical strength limitation imposed by the membrane module.
Operating Temperature: Permeate rates increase with increasing temperature. However, temperature generally is not a controlled variable. It is important to know the effect of temperature on membrane flux in order to distinguish between a drop in permeate due to a drop in temperature and the effect of other parameters.

http://www.unicarewater.com/-Ultrafiltration-Plant


When you call, don't forget to mention that you found this ad on Classifieds Dekho.

Contact for Price

Seller Details

 prasaddagade0007

 Maharashtra

 09823009383

Reply to prasaddagade0007


  • Meet in a public place during the daytime when other people will be around.
  • Check the item before you buy
  • Pay only after collecting the item
  • Get a verifiable telephone number for the seller.
  • Never send advance payment under any circumstances.
  • Ask for clear information on condition of the good, price, payment and delivery method.
  • Always use the "Reply to Seller" to get in touch with the seller. This will help us notify you immediately if we are made aware of any fraudulent activities by the seller.

Recommended for You in Other Services


Services offered by Goyal Packers and Movers in Panchkula
Traditional healer $$$ for Financial Problems $$+27630716312 in LATVIA , LEBANON , LESOTHO.
Top Babysitter Service in Andheri, Borivali, Mumbai
AutoCAD Training in Noida - APEX TGI
e-Inscription: Get Free live Lectures for NEET, Better Learning for Better Results.
Fine arts course in Dehradun
AROGYAM PURE HERBS WEIGHT LOSS KIT
Snowflake online certification Course